Stanley Planes
Stanley Planes
Stanley No. 113 Circular or Compass Plane
The Stanley No. 113 Circular Plane was used for planing convex or concave surfaces. It was one of three models Stanley had for circular planes. The other popular models were the ones known as the Victor design first produced by the Leonard Bailey company: The No. 20 Victor Circular Plane and the 20 1/2 Victor … Read more
Stanley Cabinet Makers Rabbet Plane
This Stanley Cabinet Makers Rabbet Plane is designed for fine Cabinet or other work where extreme accuracy is required. Both sides of these planes are square with the bottom, and the sides and bottoms are machine ground. The sides and bottom begin square with each other, the plane will lie perfectly flat on either side, … Read more
Stanley No. 46 Skew Cutter Combination Plane
The Stanley No. 46 Skew Cutter Combination Plane looks almost identical to the Stanley 45, except that the cutters are skewed or angled with respect to the bottom of the plane, and no beading or moulding blades were offered with them. Early models of the 46 and 47 had no fence, although the early 46’s … Read more
Rare Stanley NO 5 1/2 Early Frog 2 1/4 Inch Wide Type 10
This well preserved Stanely No 5 1/2 Frog came from an early Type 10 plane.
stanley no 278 rabbet & fillister plane
Check out this old plane. A Stanley No 278 Rabbet & Fillister Plane. Can’t imagine doing this by hand.
Stanly no. 3 bench planes
The Stanley No. 3 Bench Plane is a little smaller and easier to handle than the No. 4 plane. It’s a great one to use for smaller lighter or thinner boards and because it’s smaller and lighter, it’s much easier to manipulate. The No. 3 plane pictured below was made in England.